BMW 7 Series (F01/F02) 2008-2015 Service Manual / Passive Restraints
BMW 7 Series: Passive Restraints
- General
- Information On Using Cleaning Agent/Paints (Personal Protection Equipment)
- Safety Precautions And General Information
- Seat Belts
- Checking Automatic Safety Belt
- Removing And Installing Or Replacing Rear Left Or Right Seat Belts
- Removing And Installing/Replacing Front Left Or Right Seat Belt
- Removing And Installing/Replacing Front Lower Strap Fitting (Belt Tensioner), Front Passenger Seat
- Removing And Installing/Replacing Rear Left Or Right Lower Belt Fitting (MFS)
- Airbag Generator/Airbag Unit For Pass
- AFGS (Active Pedestrian Protection) Procedure After Accident
- Deactivating Front Passenger Airbags With Key-Operated Switch
- Procedure After Airbag Triggering As Result Of An Accident
- Removing And Installing Or Replacing Airbag Module On Front Passenger Side
- Removing And Installing Side Airbag (Front Seat)
- Repairing Airbag Cables
- Replacing Gas Cartridge For Crash-Active Headrest On Left Or Right (UP TO 09/2010)
- Replacing Gas Cartridge For Crash-Active Headrest On Left Or Right (From 09/2010)
- Safety Precautions And General Information
- Unlocking/Locking Airbag Plug Connections
READ NEXT:
Information On Using Cleaning Agent/Paints (Personal Protection
Equipment)
WARNING: Use of cleaning agents/paints not compliant with instructions
can cause
serious injuries or burns!
Handling cleaning agents/paints can trigger allergic skin and respiratory
reactions!
IMPORT
Safety Precautions And General Information
Notes on safety
SAFETY REGULATIONS for handling airbag modules, airbag components and
pyrotechnical seat belt
tensioners
NOTES ON SCRAPPING vehicles with gas generators
DEACTIVATION/ACTIVATION
SEE MORE:
Side collision mitigation
Concept
The system helps to avoid imminent side collisions.
General information
Four radar sensors in the bumpers monitor the
space next to the vehicle from a minimum speed
of up to approx. 130 mph/210 km/h.
The minimum speed is country-specific and is
displayed in the menu for the intelligent Sa
Opening Adhesive Bonds
1. Opening spot-weld bonds
OPEN WELD SPOTS.
WARNING: Extract vapors and gases.
Use personal protective clothing/equipment.
Heat connecting flange with a hot-air blower. Heat components to max. 250ºC
object temperature.
Release connection flange with chisel.
Remove adhesive residue from connecti
© 2019-2026 Copyright www.bmw7g11.com
