BMW 7 Series: Information On Using Cleaning Agent/Paints (Personal Protection
Equipment)
WARNING: Use of cleaning agents/paints not compliant with instructions
can cause
serious injuries or burns!
Handling cleaning agents/paints can trigger allergic skin and respiratory
reactions!
IMPORTANT: Observe following instructions:
- Store cleaning agents/paints only in a secure cabinet.
- Keep cleaning agents/paints away from naked flames and other sources
of ignition.
- Protect cleaning agents/paints from high temperatures and direct
sunlight.
- Always keep an eye bath on hand, change the water regularly (once a
month).
IMPORTANT: Observe following instructions before use:
- Manufacturer's instructions (on container/packaging)
- Hazard warnings (on container/packaging)
- Manufacturer's instructions on package insert
- Material safety data sheet of manufacturer
- Product information in EPC
- National market regulations
IMPORTANT: Observe following instructions during use:
- Do not eat, drink or smoke while working with these products.
- Avoid direct contact with skin and eyes.
- Wear personal protective clothing/equipment.
- Ensure that all enclosed areas are well ventilated or extract fumes
directly.
- Immediately change working clothes soiled with cleaning agent/paint.
- After finishing work, wash your hands and apply protective skin
cream.
IMPORTANT: Follow hazard warnings and wear personal protection equipment!
First Aid
Recycling
Dispose of cleaning agents/paints in a professional manner!
Observe national/country-specific disposal regulations.
READ NEXT:
Notes on safety
SAFETY REGULATIONS for handling airbag modules, airbag components and
pyrotechnical seat belt
tensioners
NOTES ON SCRAPPING vehicles with gas generators
DEACTIVATION/ACTIVATION
General considerations when checking seat belts:
The seat belts must be checked after an accident.
For the check, you should start by trying to get information on which seats in
the car involved in
SEE MORE:
Necessary preliminary work
Remove right INJECTION PIPE.
Remove THROTTLE VALVE.
Release screws on intake plenum from above without fail before lowering
front axle.
Secure ENGINE in installation position.
Lower FRONT AXLE , releasing screws on engine mount first
Release A/C compressor and pla
IPO Diagram (E65/E66)
Fig. 2: IPO Diagram (E65/E66)
Connection of Control Units
Control Unit and Camera
The Night Vision control unit and the Night Vision camera are connected via
the following cables:
LIN bus; Diagnosis, programming and camera control
Sym. Video; Video signal from the camer