SEE MORE:
REMOVING AND INSTALLING/REPLACING ANTI-ROLL BAR LINK (STABILIZER
LINK) FOR LEFT/RIGHT STABILIZER
IMPORTANT: Observe SAFETY INSTRUCTIONS for raising the vehicle
Unscrew nuts (1).
Remove anti-roll bar link (2).
Installation note:
Replace self-locking nut.
Tightening torque 31 35 2AZ.
Fig. 79: Iden
IMPORTANT: In vehicles with active steering, steering angle sensor
adjustment is integrated
in the service function INITIAL OPERATION/ADJUSTMENT FOR ACTIVE
STEERING and must not be carried out separately!
NOTE: Steering angle sensor adjustment must be carried out:
after replacement of following c