BMW 7 Series: With Parking Assistant
Plus: Remote 3D View
Concept
With the proper equipment, the BMW Connected
App and the camera images from Surround
View can be used to display the vehicle
surroundings on a mobile device such as a
smartphone.
The function displays a momentary view of the
situation.
Functional requirements
- Data transmission must be activated.
Data protection
- BMW Connected App must be installed on
the mobile device.
- ConnectedDrive countries: An activated
driver profile with an existing ConnectedDrive
account is required.
Driver profiles
Switching the function on/off
Switching on/off with other
functions
Via iDrive:
- "CAR"
- "Settings"
- "General settings"
- "Data privacy"
- "all services incl. analysis" or "all vehicle
services"
Switching on/off individually
Preset, via iDrive:
- "CAR"
- "Settings"
- "General settings"
- "Data privacy"
- "Select services individually"
- "Connected app and cust. portal" and
"Remote 3D View"
Switching on/off, via iDrive:
- "CAR"
- "Settings"
- "General settings"
- "Data privacy"
- "individual selection"
Functional limitations
The system may not be fully functional or may
not be available in the following situations:
- In poor light.
- In case of soiled cameras.
- With a door or the trunk lid open. Dark fields
in the display indicate areas that are not recorded
by the system.
- With exterior mirrors folded in.
- When other camera functions are being performed
in the vehicle.
- When the vehicle moves faster than walking
speed.
- It may not be possible to use the function in
every country.
- For reasons of data protection, the function
can only be used three times within two
hours.
READ NEXT:
Concept
The system supports the driver in the following
situations:
When parking parallel to the road, parallel
parking.
When reverse parking diagonally to the road,
diagonal parking. The syste
Switching on with the button
Press the park assistance button.
The LED lights up.
The current status of the parking space search is
indicated on the Control Display.
Parking assistant is activated
Concept
The system makes driving out of parallel parking
spaces easier.
General information
Steptronic transmission
The parking assistant calculates an optimal line
for pulling out of a parking space
SEE MORE:
TOOL
Tool MW
Note: (Press-out/-in tool set) For pressing the rubber mount out of and into
the control arm special tools 33 3
202 and 33 3 203 for E87 and E90
Storage Location
B32
SI number
01 05 90 (207)
Consisting of:
1 = 0492261 Bush
NOTE: For accommodating control arm when pressing out rubber mo
IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC
DAMAGE (ESD PROTECTION).
Necessary preliminary work
Read out the fault memory of the DME control unit.
Switch off ignition.
Disconnect BATTERY EARTH LEAD.
Remove right SUSPENSION CROSS-BRACE.
Remove SOUND INSULATION for