BMW 7 Series: With Parking Assistant: Parking Assistant- Switching on and activating

Switching on with the button

Press the park assistance button.

The LED lights up.

The current status of the parking space search is indicated on the Control Display.

Parking assistant is activated
automatically.

Switching on with reverse gear

1. Shift into reverse.

   The current status of the parking space search is indicated on the Control Display.

2. If necessary, activate:
   "Autom. Parking"

Switching on via iDrive

Display of the rearview camera or PDC view must be active.

1. Move the Controller to the right.
2.  Activate the parking assistant on the Control Display: "Autom. Parking"

Display on the Control Display

System activated/deactivated

Symbol/ Meaning

Gray: the system is not
available.

White: the system is available but not activated.

System is activated.

Parking space search is active.

The parking procedure is active.
The system takes over the steering.

Parking space search and system status

• Parking assistant is
  activated and parking space search is active.
• Control Display shows suitable parking spaces at the edge of the road next to the vehicle symbol. When Park Assistant is active, suitable parking spaces are highlighted and an acoustic signal sounds.
• If a diagonal or parallel parking space is clearly detected, the system automatically adjusts the suitable parking method. In the case of parking spaces suitable for parallel and diagonal parking, a selection menu is displayed. In this case, the desired parking method must be selected manually.
• The parking procedure is
  active. The system takes over the steering.
• Parking space search is always active whenever the vehicle is moving forward slow and straight, even if the system is deactivated.

  When the system is deactivated, the displays on the Control Display are shown in gray.

Signal tones

Switching signal tone for suitable parking spaces on/off

Via iDrive:

1. "CAR"
2. "Settings"
3.  "Driver Assistance"
4. "Parking and maneuvering"
5. "Automatic Parking"
6. "Alert if parking space detected"

The setting is stored for the driver profile currently used.

Signal tones of the PDC Park Distance Control

During an automatic parking operation, no intermittent tone will sound from the PDC Park Distance Control.

A continuous tone sounds when the distance to a detected object is less than approx. 8 inches/ 20 cm.

Parking using the parking assistant

Parking

1. Switching on and activating the parking assistant.

   For this, engage the reverse gear or press the parking assist button and activate the system on the Control Display, if needed.

   Parking assistant is activated.



2. Pass the row of parked vehicles forward at a speed of up to approx. 22 mph/35 km/h and at a distance of maximum 5 ft/1.5 m.

   The status of the parking space search and possible parking spaces are displayed on the Control Display.

3. Confirm the suggested parking space for the parking process: select the parking space on the Control Display.

   The system takes over the steering.

4. Follow the instructions on the Control Display.

   At the end of the parking procedure, the P selector lever position is set.

   The end of the parking procedure is indicated on the Control Display.

5. Adjust the parking position yourself, if needed.

Interrupting manually

The parking assistant can be interrupted at any time:

• Press the park assistance
  button.
• "Autom. Parking": select
  the symbol on the Control Display.

Interrupting automatically

The system is interrupted automatically in the following situations:

• Possibly on snow-covered or slippery road surfaces.
• When there are obstacles that are hard to overcome, such as curbs.
• When there are obstacles that suddenly appear.
• If the PDC Park Distance Control displays clearances that are too small.
• When a maximum number of parking attempts or the time taken for parking is exceeded.
• When switching to another function on the Control Display.
• If the trunk lid is open.
• If doors are open.
• When setting the parking brake.
• During acceleration.
• When the brake pedal remains pressed for an extended period while the vehicle is stationary.
• When unfastening the driver's safety belt.

A Check Control message is displayed.

Resuming

An interrupted parking procedure can be continued, if needed.

Reactivate the parking assistant and follow the instructions on the Control Display.

Switching off

The system can be switched off manually:

Press the park assistance button.

READ NEXT: