BMW 7 Series: Intersection collision warning
Concept
The system may prevent some accidents with cross traffic at intersections and junctions. In the event of an accident, the system may reduce impact speed.
The system sounds a warning in the city speed range before an imminent collision and activates brakes independently, if needed.
General information
The system is controlled by the following sensors:
- Camera in the area of the interior mirror.
- Radar sensors on the side in the front bumper.
- Radar sensor in the center in the front bumper.
At intersections and junctions, a warning is issued when a danger of collision with crossing traffic is detected.
The system issues a two-phase warning of a possible risk of collision with vehicles at speeds above approx. 6 mph/10 km/h. The timing of warnings may vary with the current driving situation.
The Driver Attention Camera in the instrument cluster captures the driver's field of vision. Additionally, the system checks for visual impairments.
Field of vision and visibility also affect the timing of the warnings.
Detection range
Vehicles that cross your direction of travel can be detected by the system as soon as these vehicles enter into the detection range of the system.
Safety information
.gif)
Warning
The system cannot serve as a substitute for the driver's personal judgment in assessing visibility and traffic situation. There is a risk of accident.
Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.
.gif)
Warning
Indicators and warnings cannot serve as a substitute for the driver's personal judgment. Due to its limits, the system may not issue warnings or reactions, or these may be issued late or in a manner that is not consistent with their normal use. There is a risk of accident. Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.
Warning
Due to system limits, individual functions can malfunction during tow-starting/towing with the Intelligent Safety systems activated. There is a risk of accident. Switch all Intelligent Safety systems off prior to tow-starting/towing.
Overview
Button in the vehicle
.gif)
.gif)
Intelligent Safety
Camera
.gif)
The camera is installed near the interior mirror.
Keep the windshield in front of the interior mirror clean and clear.
Radar sensors
The radar sensors are located in the front bumper.
.gif)
Front side bumper.
.gif)
Front center bumper.
Keep the radar sensors clean and unobstructed.
READ NEXT:
Intersection collision
warning- Switching on/off
Switching on automatically
The system is automatically active after every
driving off.
Switching on manually
Press the button.
The menu for the Intelligent Safety system
is displayed.
If all Intelli
Intersection collision
warning- System limits
Safety information
Warning
The system is designed to operate in certain
conditions and circumstances. Due to conditions
or other factors, the system may not respond.
There may be a risk of accident
Person warning with City
braking function
Concept
The system can help prevent accidents involving
pedestrians and cyclists. In the event of an accident,
the system may reduce impact speed.
The system sounds a warning in the city speed
range
SEE MORE:
Integrated key
General information
The driver's door can be locked and unlocked
without the vehicle key using the integrated key.
The integrated key also fits the glove compartment.
Safety information
Warning
For some country versions, unlocking from the
inside is only possible with special knowledge.
Persons w
Mandrel
Minimum set: Mechanical tools Mandrel MW
Note: (drift) For driving radial shaft seal onto drive flange.
Storage Location
B26
SI number
01 09 09 (532)
Fig. 25: Identifying Mandrel (330150)
Mandrel MW
Replaced by: 0491891
Note: (Drift) Replaced by 31 2 040.(0 491 891)
Mandrel MW
Replaced by: 0492338
