Lever footwell light (1) in direction of arrow out of panel for pedals (2).
Disconnect plug connection behind and remove footwell light (1).
Fig. 96: Removing Footwell Light
Lever footwell light (1)
Notes
Carefully lever out interior roof light (1) in direction of arrow with
special tool 00 9 317.
Fig. 101: Removing Interior Roof Light Using Special Tool 00 9 317
Disconnect plug connection (1)
Necessary preliminary tasks
Remove FRONT LEFT DOOR TRIM PANEL
Unlock LED for front door trim panel (1) from holder (2).
Detach LED for front door trim panel (1).
Installation
Make sure LED for fro
Minimum set: Mechanical tools Open-end wrench MW
Note: Open-end spanner SW50 with retaining clip For releasing and tightening
down the insert nuts for the
screw connection of the propeller shaft on the rear axle final drive.
Storage Location
A18
SI number
01 21 06 (300)
Fig. 32: Identifying Open-E
REMOVING AND INSTALLING (REPLACING) TELEMATIC COMMUNICATION BOX
IMPORTANT: Read and comply with notes on protection against electrical
damage (ESD
PROTECTION).
Comply with notes and instructions on HANDLING OPTICAL FIBRES.
Necessary preliminary work:
Clamp off BATTERY NEGATIVE LEAD.
Remove LEFT