BMW 7 Owners & Service Manuals

BMW 7 Series: Evasion Assistant

Concept

The system supports the driver in making evasive maneuvers in certain situations, such as when obstacles or persons suddenly appear.

General information

The system issues a warning and intervenes to support the driver if a lateral evasive maneuver is possible. Sensors monitor and detect the clearance around the vehicle. If the system identifies space alongside the vehicle, it supports an evasive maneuver begun by the driver by safely providing targeted steering support.

Safety information

Warning


The system cannot serve as a substitute for the driver's personal judgment in assessing visibility and traffic situation. There is a risk of accident.

Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.

Warning


Indicators and warnings cannot serve as a substitute for the driver's personal judgment. Due to its limits, the system may not issue warnings or reactions, or these may be issued late or in a manner that is not consistent with their normal use. There is a risk of accident. Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate

Overview

Radar sensors

The radar sensors are located in the bumpers.

Front center bumper


Front center bumper.

Front side bumper


Front side bumper.

Rear bumper


Rear bumper.

Always keep the bumper in the area of the radar sensors clean and unobstructed.

Camera

Camera


The camera is installed near the interior mirror.

Keep the windshield in front of the interior mirror clean and clear.

Functional requirements

  • Pedestrian warning with braking function is switched on.

    Person warning with City braking function

  • Front collision mitigation is switched on.

    Front collision mitigation

  • Sensors detect sufficient clearance around the vehicle.

Switching on/off

The system is automatically active after every driving off.

    READ NEXT:

     Evasion Assistant- Warning with evasion support

    Display in the instrument cluster A warning symbol appears in the instrument cluster and in the Head-up Display if a collision with a detected vehicle is imminent. Symbol /Measure Symbol lights up red

     Intersection collision warning

    Concept The system may prevent some accidents with cross traffic at intersections and junctions. In the event of an accident, the system may reduce impact speed. The system sounds a warning in the ci

     Intersection collision warning- Switching on/off

    Switching on automatically The system is automatically active after every driving off. Switching on manually Press the button. The menu for the Intelligent Safety system is displayed. If all Intelli

    SEE MORE:

     Replacing Roof Outer Skin (Version With Slide/tilt Sunroof)

    Read contents of BODY, GENERAL. STRIP DOWN VEHICLE NOTE: Observe new procedure for bonding and riveting (REPAIR STAGE 2). Following parts are required: Roof outer skin Additional required parts (not pictured): PART SPECIFICATION Following consumables are required: MATERIAL CHART Fig. 289: Ide

     Drive, Seat Adjustment

    REMOVING AND INSTALLING/REPLACING LUMBAR SUPPORT DRIVE MECHANISM ON FRONT SEAT, LEFT OR RIGHT Necessary preliminary tasks Remove rear panel on front seat backrest. Unfasten plug connection (1) and disconnect. Release clips (2). Feed out drive unit for lumbar support in upward direction. Instal

    © 2019-2024 Copyright www.bmw7g11.com