BMW 7 Series: BMW maintenance system
Vehicle features and options
This chapter describes all standard, country-specific and optional features offered with the series.
It also describes features and functions that are not necessarily available in your vehicle, e.g., due to the selected options or country versions. This also applies to safety-related functions and systems.
When using these functions and systems, the applicable laws and regulations must be observed.
BMW maintenance system
The maintenance system provides service notifications and thereby provides support in maintaining road safety and the operational reliability of the vehicle.
In some cases, scopes and intervals of the maintenance system may vary according to the country version. Replacement work, spare parts, fuels and lubricants, and wear materials are calculated separately. Further information is available from a dealer's service center or another qualified service center or repair shop.
Condition Based Service CBS
Concept
Sensors and special algorithms take into account the driving conditions of the vehicle. CBS uses these to calculate the need for maintenance.
The system makes it possible to adapt the amount of maintenance corresponding to your user profile.
General information
Information on service notifications can be displayed on the Control Display.
Additional information: Service notifications
Service data in the vehicle key
Information on the service notifications is continuously stored in the vehicle key. The service center can read this data out and suggest a maintenance scope for the vehicle.
Therefore, hand the service advisor the vehicle key with which the vehicle was driven most recently.
Storage periods
Storage periods during which the vehicle battery was disconnected are not taken into account.
If this occurs, have a dealer's service center or another qualified service center or repair shop update the time-dependent maintenance procedures, such as checking brake fluid and, if necessary, changing the engine oil and the microfilter/ activated-charcoal filter.
Maintenance Manual and Service and Warranty Information Booklet for US models and Warranty and Service Guide Booklet for Canadian models
Please consult your Maintenance Manual and Service and Warranty Information Booklet for US models and Warranty and Service Guide Booklet for Canadian models for additional information on the performance of service and maintenance work.
The manufacturer of your vehicle recommends that maintenance and repair be performed by a service center or another qualified service center or repair shop. Records of regular maintenance and repair work should be retained.
READ NEXT:
Socket for OBD Onboard
Diagnosis
General information
Devices connected to the OBD socket trigger
the alarm system when the vehicle is locked. Remove
any devices connected at the OBD socket
before locking the vehicle.
Safety informati
Replacing components
Vehicle features and
options
This chapter describes all standard, country-specific
and optional features offered with the series.
It also describes features and functions that are
not necessarily ava
Wiper blades
Safety information
NOTICE
The window may sustain damage if the wiper
falls onto it without the wiper blade installed.
There is a risk of damage to property. Hold the
wiper firmly when changing the wi
SEE MORE:
Replacing Front Left Door Post (Front Side Panel Removed)
Procedure OBSERVE repair stage 3! Read contents of BODY, GENERAL.
Spot-weld bonding is used on this vehicle. Observe specific procedure.
Place vehicle on straightening bench.
Following new body parts are required:
A-pillar, outer
Connection, side frame
Shaped part, carrier support, wheel arch
Removing And Installing/Replacing Both Solenoid Valves On Left Side
(N63)
IMPORTANT: Always check that the solenoid valves are clean during removal
and
installation.
Possible malfunctions if valves are contaminated:
Irregular operation
OBD incorrect entry
Poor exhaust gas values
Low engine performance
IMPORTANT: Risk of damage!
Do not clean solenoid valves with co
