BMW 7 Series: Wiper blades
Safety information
NOTICE
The window may sustain damage if the wiper falls onto it without the wiper blade installed.
There is a risk of damage to property. Hold the wiper firmly when changing the wiper blade. Do not fold or switch on the wiper without a wiper blade installed.
NOTICE
Folded-away wipers can be jammed when the hood is opened. There is a risk of damage to property. Make sure that the wipers with the wiper blades mounted are folded down onto the windshield before opening the hood.
Replacing
- To change the wiper blades, fold up the wiper
arms.
Fold-away position of the wipers
- Lift the wiper off of the windshield and hold.
.gif)
- Press the button, arrow 1, and pull out the wiper blade, arrow 2.
.gif)
- Insert the new wiper blade and press it on until it you hear it snap into the holder.
- Fold down the wipers.
Lights and bulbs
General information
Lights and bulbs make an essential contribution to vehicle safety.
All headlights and lights are made using LED or laser technology.
Some items of equipment use light-emitting diodes installed behind a cover as a light source.
These light-emitting diodes are related to conventional lasers and are officially designated as Class 1 light-emitting diodes.
The manufacturer of the vehicle recommends that you let a dealer's service center or another qualified service center or repair shop perform the work in case of a malfunction.
Safety information
Warning
Focused laser light can irritate or permanently damage the retina of the eye. There is a risk of injury. The manufacturer of the vehicle recommends that the work on the lighting system including bulb replacement be performed by a dealer's service center or another qualified service center or repair shop.
Warning
Intensive brightness can irritate or damage the retina of the eye. There is a risk of injury. Do not look directly into the headlights or other light sources. Do not remove the LED covers.
Headlight glass
Condensation can form on the inside of the headlight glass in cool or humid weather. When driving with the lights switched on, the condensation evaporates after a short time. The headlight glass does not need to be changed.
If despite driving with the headlights switched on, increasing humidity forms, for instance water droplets in the light, have the headlights checked.
READ NEXT:
Vehicle battery
General information
The battery is maintenance-free.
More information about the battery can be requested
from a dealer's service center or another
qualified service center or repair shop.
Safety info
Fuses
General information
The fuses are located at different places in the
vehicle.
Safety information
Warning
Incorrect and repaired fuses can overload electrical
lines and components. There is a risk of
f
Breakdown assistance
Vehicle features and
options
This chapter describes all standard, country-specific
and optional features offered with the series.
It also describes features and functions that are
not necessarily ava
SEE MORE:
Removing And Installing Operating Unit For Additional Seat
Functions
Notes
Release latch mechanism (1) on operating unit (2) using special tool 64 1 020. At same time carefully lever out
operating unit (2) using special tool 00 9 317.
Disconnect plug connection behind and remove operating unit (2).
Fig. 208: Releasing Latch Mechanism On Operating Unit Using Special
Removing And Installing RDC (Tyre Pressure Control) Control Unit
IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC
DAMAGE (ESD protection).
Necessary preliminary tasks
Remove right LUGGAGE COMPARTMENT WHEEL ARCH PANEL.
Disconnect plug connection (1).
Pull out RDC control unit (2) upwards in direction of arrow.
Fig. 35: Pulling Out RDC
