BMW 7 Series (G11/G12) 2015-2022 Owners Manual / Mobility / Maintenance
BMW 7 Series: Maintenance
READ NEXT:
BMW maintenance system
Vehicle features and
options
This chapter describes all standard, country-specific
and optional features offered with the series.
It also describes features and functions that are
not necessarily ava
Socket for OBD Onboard
Diagnosis
General information
Devices connected to the OBD socket trigger
the alarm system when the vehicle is locked. Remove
any devices connected at the OBD socket
before locking the vehicle.
Safety informati
Replacing components
Vehicle features and
options
This chapter describes all standard, country-specific
and optional features offered with the series.
It also describes features and functions that are
not necessarily ava
SEE MORE:
Removing And Installing/Renewing Left Exhaust Manifold (N63)
WARNING: Risk of burning!
Only perform this repair work on an engine that has cooled down.
Necessary preliminary work
Remove left TURBOCHARGER.
Remove right TURBOCHARGER.
Remove ALTERNATOR (not F04).
Release screws (1).
Tightening torque 18 31 4AZ.
Fig. 54: Identifying Screws
Release screws (
Integrated Sensor System
The sensors that were previously accommodated separately in the DSC sensor
are now installed in the ICM
control unit.
The ICM control unit uses these sensors to calculate variables that provide key
information on the vehicle's
dynamic state:
Longitudinal acceleration and pitch of the vehicle in
© 2019-2026 Copyright www.bmw7g11.com
