BMW 7 Series: General Instructions On Paintwork

General instructions and classification of paint stages are described on the KSD-CD (notes-general information on flat rate unit data, passenger car explanation for FR specifications for painting).

For further information, please refer to BMW Painting Handbook.

The marked area serves as the starting point for painting. This area may differ from the illustration for technical painting reasons.

Touching-up areas are taken into account.

Special procedure for matte paintwork: Matte paintwork cannot be touched up since the painted surface cannot be polished.

For further information, see also the BMW painting handbook and the Aftersales Assistance Portal.

INFORMATION/WARNING LABELS

Missing or damaged information/warning labels (e.g. tire inflation pressure) must be replaced.

INFORMATION ON USING CLEANING AGENT/PAINTS (PERSONAL PROTECTION EQUIPMENT)

WARNING: Use of cleaning agents/paints not compliant with instructions can cause serious injuries or burns! Handling cleaning agents/paints can trigger allergic skin and respiratory reactions!

IMPORTANT: Observe following instructions:

• Store cleaning agents/paints only in a secure cabinet.
• Keep cleaning agents/paints away from naked flames and other sources of ignition.
• Protect cleaning agents/paints from high temperatures and direct sunlight.
• Always keep an eye bath on hand, change the water regularly (once a month).

IMPORTANT: Observe following instructions before use:

• Manufacturer's instructions (on container/packaging)
• Hazard warnings (on container/packaging)
• Manufacturer's instructions on package insert
• Material safety data sheet of manufacturer
• Product information in EPC
• National market regulations

IMPORTANT: Observe following instructions during use:

• Do not eat, drink or smoke while working with these products.
• Avoid direct contact with skin and eyes.
• Wear personal protective clothing/equipment.
• Ensure that all enclosed areas are well ventilated or extract fumes directly.
• Immediately change working clothes soiled with cleaning agent/paint.
• After finishing work, wash your hands and apply protective skin cream.

IMPORTANT: Follow hazard warnings and wear personal protection equipment!

First Aid

• If product comes in contact with eyes, immediately flush with running water for about 10 - 15 minutes.

  Seek the advice of eye specialist.

• In the event of skin contact and where applicable an allergic skin reaction, clean the affected areas immediately with soap and water and then apply silicone-free skin cream. Seek advice of physician.
• If an adhesive product is swallowed, rinse mouth/parts of mouth thoroughly with running water. Drink 1- 2 glasses of water. Do not induce vomiting. Consult a doctor.
• After inhaling vapors ensure ample supply of fresh air. Keep calm, keep respiratory tracks clear and call doctor.

Recycling

Dispose of cleaning agents/paints in a professional manner! Observe national/country-specific disposal regulations.

INFORMATION/RECOMMENDATIONS AND REPAIR METHODS FOR ALUMINIUM WHEELS

Cosmetic repairs of aluminium wheels using ColorSystem

Recommendations and repair methods for aluminium wheels are described in the ASAP system from the following sources:

• Aftersales Assistance Portal (BMW)
• Service/Technology (BMW)
• ColorSystem (BMW)
  • Repair recommendations for aluminium wheels (BMW)

READ NEXT: