BMW 7 Series: Active Cruise Control with Stop & Go function ACC
Concept
Using this system, a desired speed and a distance to a vehicle ahead can be adjusted using the buttons on the steering wheel.
The system maintains the desired speed on clear roads. The vehicle accelerates or brakes automatically.
If a vehicle is driving ahead of you, the system adjusts the speed of your vehicle so that the set distance to the vehicle ahead is maintained. The speed is adjusted as far as the given situation allows.
General information
A radar sensor is located in the front bumper and a camera on the interior mirror to detect vehicles driving ahead of you.
Depending on the vehicle setting, the cruise control settings may change under certain conditions.
For instance, acceleration can change depending on the driving mode.
The distance can be adjusted in several steps.
For safety reasons, it depends on the respective speed.
If the vehicle ahead of you brakes to a halt, and then proceeds to drive again within a brief period, the system is able to detect this within the given system limits.
Safety information
.gif)
Warning
The system cannot serve as a substitute for the driver's personal judgment in assessing the traffic conditions. Based on the limits of the system, it cannot independently react to all traffic situations. There is a risk of accident. Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.
.gif)
Warning
An unsecured vehicle can begin to move and possibly roll away. There is a risk of accident.
Before exiting, secure the vehicle against rolling.
In order to ensure that the vehicle is secured against rolling away, follow the following:
- Set the parking brake.
- On uphill grades or on a downhill slope, turn the front wheels in the direction of the curb.
- On uphill grades or on a downhill slope, also secure the vehicle, for instance with a wheel chock.
Warning
The desired speed can be incorrectly adjusted or called up by mistake. There is a risk of accident.
Adjust the desired speed to the traffic conditions. Watch traffic closely and actively intervene where appropriate.
Warning
Risk of accident due to too high speed differences to other vehicles, for instance in the following situations:
- When fast approaching a slowly moving vehicle.
- Vehicle suddenly swerving into own lane.
- When fast approaching standing vehicles.
There is a risk of injuries or danger to life.
Watch traffic closely and actively intervene where appropriate.
READ NEXT:
Active Cruise Control with Stop & Go function ACC- Overview
Buttons on the steering wheel
Button /Function
With steering and traffic jam
assistant:
Cruise control on/off.
With steering and traffic jam
assistant:
Select function.
Without steering and traffic
Active Cruise Control with Stop & Go function ACC- Setting the speed
Maintaining and storing the speed
Press the rocker switch up or down once while
the system is interrupted. The system will be activated.
The current speed is maintained and stored as
desired speed.
Active Cruise Control with Stop & Go function ACC- Changing between cruise control
with/without distance control
Safety information
Warning
The system does not react to traffic driving
ahead of you, but instead maintains the stored
speed. There may be a risk of accident or risk
of damage to property. Adjust the
SEE MORE:
Removing And Installing/Replacing Left High Pressure Pump (N63)
WARNING: Observe warning on cylinder head cover.
Disconnect NEGATIVE BATTERY TERMINAL (risk of fire due to short
circuit on removal).
Electric fuel pump starts up automatically when door is opened!
Carry out installation work on fuel system only with coolant temperature
below 40ºC.
IMPORTANT: Wear
Replacing Inside Light
Unclip cover (1) at side recess (arrowed) and remove towards bottom.
Fig. 196: Locating Cover Side Recess
Unclip lamp housing (1) at side recess (arrowed).
Fig. 197: Locating Lamp Housing Recess
Disconnect flat connector (1) from flat connector contact.
Fig. 198: Identifying Flat Connector
CAUTIO
