BMW 7 Series: Lashing eyes in the cargo area
General information
Attach load securing aids, such as lashing straps, tensioning straps, draw straps or cargo nets, to the lashing eyes in the cargo area.
Lashing eyes
.gif)
There are four lashing eyes in the cargo area for securing cargo.
Multi-function hook
General information
A multi-function hook is located on the left side in the cargo area.
Safety information
Warning
Improper use of the multi-function hooks can lead to a risk of objects flying about during braking and evasive maneuvers, for example.
There is a risk of injury and risk of damage to property. Only hang lightweight objects, such as shopping bags, from the multi-function hooks. Only transport heavy luggage in the cargo area if it has been appropriately secured.
Folding down
.gif)
Press on the multi-function hook and turn until it engages.
Net
Small objects can be stowed in the net on the left side.
Storage compartment on the right side
A storage compartment is available on the right side of the cargo area.
Storage compartment on the left side
General inform
A storage compartment is located on the left side in the cargo area.
Opening
.gif)
Pull the handle.
With emergency wheel: storage compartment under the cargo floor panel
General information
There is a storage compartment under the cargo floor panel.
Opening
.gif)
Fold up the cargo floor panel.
Closing
Push the cargo floor panel downward.
READ NEXT:
Through-loading system
Concept
The through-loading system allows the transport
of long objects, such as skies.
Without comfort seats: opening through-loading
Fold down the center armrest.
Remove flap.
Pull handle, a
Driving tips
Information regarding improving the driving experience is included in this chapter. It provides a variety of observations and suggestions meant to encourage effectiveness, comfort, and safety when dri
SEE MORE:
Removing And Installing/Replacing Front Speaker Carrier (Instrument Panel)
Notes
Unclip trim (1) from latching mechanisms with special tool 00 9 325.
Fig. 31: Removing Trim From Latch Mechanisms Using Special Tool (00 9 325)
Release screws (1).
Remove speaker carrier (2) and disconnect associated plug connection.
Fig. 32: Identifying Screws And Speaker Carrier
Installat
Notes On Handling Optical Fibres
IMPORTANT: To avoid damage when handling optical fibres, comply with the
following
points:
The minimum permitted bending radius is 25 mm
Do not subject optical fibres to compressive and tensile load
Protect optical fibres against the effects of heat > or =85 ºC (e.g.
during
welding work,
