BMW 7 Series: Introduction
All Interior Lighting Systems
The interior lighting is based on the interior lighting on the F01/02 is based on E90. The interior lighting comprises the lights in the passenger compartment roof, luggage compartment, footwell and the interior door lights.
Exterior door lighting is provided by the courtesy lights (exterior door handles) and the doorway lights.
The front and rear passenger compartment roof lights are in the form single light units.
A new feature is the light for the map pocket on the backrest of the front seat.
The graphic below shows the control units that have an influence on the interior lighting:
.png)
Fig. 68: Identifying Control Units For Interior Lighting On F01/F02
COMPONENTS DESCRIPTION CHART
- Junction box module
- Advanced crash safety management
- Roof function center
- Footwell module
- Car Access System
Interior Lighting
The following provides an overview of interior lighting.
- Interior light with interior light switch
- Reading light with reading light button for driver and front passenger
- Ambient interior light for driver and front passenger
- Front and rear door pocket lights, driver's/passenger side
- Front and rear interior door handle lights, driver's/passenger side
- Front and rear sill lights, driver's/passenger side
- Front and rear doorway lights, driver's/passenger side
- Driver's/passenger side courtesy lights, front and rear
- Driver's/passenger side exterior door handle lights, front and rear
- Driver's/passenger side vanity mirror lights, front and rear*
- Driver's/passenger side footwell lights, front and rear*
- Glove compartment light
- Center console stow compartment light, front and rear
- Map pocket lights in front seat backrests
- Rear center armrest stow compartment light
- Luggage compartment lighting
* Equipment option only available in rear on F02
READ NEXT:
System Overview
Schematic System Circuit Diagram - Interior Lighting
The system circuit diagram follows the description below and provides an
overview of the full extent of all
possible interior lighting options.
T
Functions
Important Control Units in the Interior Lighting System
The interior lighting on the F01/F02 is switched on and off by the footwell
module (FRM).
The roof function center (FZD) is responsible for th
System Components
Interior Lighting, Front
The components for the interior lighting in the front roof area are
integrated in the roof functions center and in
the sun visors. The footwell lighting is located on the und
SEE MORE:
Carrying Out Ride Height Adjustment
NOTE: Ride height adjustment must be carried out after the following work:
Removal/replacement of ride height sensor or its control rod (only
necessary for vehicles with air suspension or vehicles with VDC)
Replacement of wiring harness
Replacement of air supply system control unit (F01/F02/F04
Parking brake
Concept
The parking brake is used to prevent the vehicle
from rolling when it is parked.
Safety information
Warning
An unsecured vehicle can begin to move and
possibly roll away. There is a risk of accident.
Before exiting, secure the vehicle against rolling.
In order to ensure that the vehicle i
