Danger of poisoning!
Ingesting oil or absorbing through the skin may cause poisoning!
Possible symptoms are:
Headaches
Dizziness
Stomach aches
Vomiting
Diarrhoea
Cramps/fits
Unconsciousness
P
WARNING: Danger to life!
Read and follow operating instructions for lifting platform.
Do not exceed carrying capacity of lifting platform.
NOTE: The lifting platform must comply with the relevant sta
Fig. 8: Rear Axle Layout
Overview, rear axle support with rubber mount
Overview of rear differential/output shafts
Compression strut, front
Overview of steering links
Anti-roll bar link
Anti-r
Drill out rivets (1).
Fig. 40: Identifying Loading Ramp Rivets
REMOVING CAMLOCK SCREW CAP
Bend back edges (1) of tab washer (2). Remove tab washer (2) over cross pin
(3) towards bottom.
Installation
Replace lockplate.
Fig. 41: Identifying Back Edges Of Tab Washer With Cross Pin
REMOVING AND INSTA
Necessary preliminary work
Remove LEFT CYLINDER HEAD.
Remove RIGHT CYLINDER HEAD.
Remove ALL VALVES.
NOTE: Set of special tools 11 8 080 can be used for cylinder bank 1 to 4
and cylinder
bank 5 to 8.
Position special tool 11 8 081 on cylinder head.
Fig. 44: Positioning Special Tool 11 8 081 O