BMW 7 Series (G11/G12) 2015-2022 Owners Manual / Mobility / Engine compartment
BMW 7 Series: Engine compartment
READ NEXT:
Overview
Vehicle features and
options
This chapter describes all standard, country-specific
and optional features offered with the series.
It also describes features and functions that are
not necessarily ava
Hood
Safety information
Warning
Improperly executed work in the engine compartment
can damage vehicle components and
impair vehicle functions. There is a risk of an
accident and damage to property. Have wo
SEE MORE:
Replacing Level Switch For Dynamic Drive Fluid Reservoir
Necessary preliminary work
Remove intake duct for air filter housing.
Release screws (1) and (2).
Remove washers.
Tightening torque 32 41 1AZ/2AZ
Remove fluid reservoir by pulling upwards.
Fig. 161: Identifying Washer Screws
NOTE: Raise and/or turn fluid reservoir in order to gain better acces
Removing Entry Profile Section On Loading Ramp, Left, Right And
Center
CAUTION: Before drilling out rivets, drive in rivet pins with a punch.
Drill out rivets (1). Remove entry profile section (2) towards front.
Fig. 62: Identifying Profile Section On Loading Ramp And Rivets
REMOVING LEFT OR RIGHT SHOCK ABSORBER
Inspect the shock absorber while installed to ascertain
© 2019-2026 Copyright www.bmw7g11.com
