NOTES ON INITIALIZING ELECTRIC SEAT ACTUATOR DRIVES
NOTE: Initialization is carried out at the adjusting switch of the
relevant seat.
In this process, the end positions of the relevant electric seat actuator
drive are recorded and stored.
An initialization must be performed:
After replacing a dr
Reshaping or heating extruded sections and cast parts is not
permitted!
Failure to comply with this requirement would have the following
results:
In the case of reshaping, weld seams (E52) or glued connections (E60, E61,
E63, E64) tear in the
surrounding area.
In the case of reshaping, t