BMW 7 Series: Care
READ NEXT:
Washing the vehicle
Vehicle features and
options
This chapter describes all standard, country-specific
and optional features offered with the series.
It also describes features and functions that are
not necessarily ava
Vehicle care
Vehicle care products
General information
BMW recommends using vehicle care and
cleaning products from BMW. Suitable care
products are available from a dealer's service
center or another qualified ser
Vehicle care- Caring for special components
Caring for special components
Light-alloy wheels
When cleaning the vehicle, use only neutral
wheel cleaners having a pH value from 5 to 9. Do
not use abrasive cleaning agents or steam jets
above 140 â
SEE MORE:
Removing And Installing/Replacing Front Centering Mount For
Propeller Shaft
Necessary preliminary work
Remove PROPELLER SHAFT.
Completely fill centering bore hole (1) with viscous grease.
Drive special tool 11 1 310 with a plastic hammer into centering bore hole.
The centering bearing (1) is forced out of the propeller shaft by the pressure
on the grease filling.
If
Removing And Installing/Replacing Dust Filter For Natural Vacuum
Leak Detection (NVLD)
Necessary preliminary work:
Remove CARBON CANISTER.
Unlock and disconnect snap fastener (1).
Release screw (2) and remove dust filter (3).
Installation note:
Check gasket and replace if necessary.
Fig. 44: Identifying Natural Vacuum Leak Detection (NVLD) Dust Filter, Snap
Fastener, And Screw
© 2019-2026 Copyright www.bmw7g11.com
